This is the latest recevied telemetry packets stored in our database for station/object SP5UID-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744747679 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1744747665 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1744747657 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1744747615 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1744747614 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1744747612 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1744747610 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1744747607 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1744747605 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1744746977 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1744746856 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1744731641 | 3.09 VDC | 0 | 0 | 0 | 0 |
| 1744730740 | 3.12 VDC | 0 | 0 | 0 | 0 |
| 1744729839 | 3.16 VDC | 0 | 0 | 0 | 0 |
| 1744728937 | 3.12 VDC | 0 | 0 | 0 | 0 |
| 1744728037 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1744727136 | 3.15 VDC | 0 | 0 | 0 | 0 |
| 1744726235 | 3.09 VDC | 0 | 0 | 0 | 0 |
| 1744725334 | 3.18 VDC | 0 | 0 | 0 | 0 |
| 1744724432 | 3.11 VDC | 0 | 0 | 0 | 0 |
| 1744723532 | 3.19 VDC | 0 | 0 | 0 | 0 |
| 1744722631 | 3.1 VDC | 0 | 0 | 0 | 0 |
| 1744721730 | 3.09 VDC | 0 | 0 | 0 | 0 |
| 1744720829 | 3.1 VDC | 0 | 0 | 0 | 0 |
| 1744719927 | 3.08 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)