This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764462417 | 137 Count | 448 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764462117 | 136 Count | 444 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764461817 | 135 Count | 436 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764461518 | 134 Count | 433 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764461217 | 133 Count | 433 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764460917 | 132 Count | 425 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764460617 | 131 Count | 424 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764460317 | 130 Count | 423 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764460017 | 129 Count | 418 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764459717 | 128 Count | 417 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764459417 | 127 Count | 414 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764459117 | 126 Count | 410 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764458818 | 125 Count | 406 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764458518 | 124 Count | 404 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764458219 | 123 Count | 400 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764457918 | 122 Count | 397 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764457618 | 121 Count | 396 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764457319 | 120 Count | 392 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764457019 | 119 Count | 388 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764456718 | 118 Count | 388 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764456419 | 117 Count | 382 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764456119 | 116 Count | 381 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764455819 | 115 Count | 379 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764455519 | 114 Count | 371 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1764455219 | 113 Count | 369 Count | 0 Count | 3.9 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)