This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758196801 | 101 Count | 867 Count | 65 Count | 2.78 VDC | 0 VDC |
| 1758195900 | 100 Count | 847 Count | 65 Count | 2.81 VDC | 0 VDC |
| 1758195000 | 99 Count | 828 Count | 65 Count | 2.68 VDC | 0 VDC |
| 1758194099 | 98 Count | 797 Count | 65 Count | 2.82 VDC | 0 VDC |
| 1758193198 | 96 Count | 776 Count | 65 Count | 2.68 VDC | 0 VDC |
| 1758192334 | 92 Count | 751 Count | 65 Count | 2.8 VDC | 0 VDC |
| 1758191433 | 91 Count | 730 Count | 65 Count | 2.8 VDC | 0 VDC |
| 1758190532 | 89 Count | 700 Count | 65 Count | 2.84 VDC | 0 VDC |
| 1758189631 | 87 Count | 670 Count | 65 Count | 2.81 VDC | 0 VDC |
| 1758188730 | 86 Count | 645 Count | 65 Count | 2.82 VDC | 0 VDC |
| 1758187829 | 85 Count | 621 Count | 65 Count | 2.86 VDC | 0 VDC |
| 1758186928 | 80 Count | 576 Count | 62 Count | 2.83 VDC | 0 VDC |
| 1758186027 | 79 Count | 554 Count | 62 Count | 2.8 VDC | 0 VDC |
| 1758185127 | 77 Count | 526 Count | 62 Count | 2.78 VDC | 0 VDC |
| 1758184226 | 75 Count | 486 Count | 62 Count | 2.67 VDC | 0 VDC |
| 1758183325 | 73 Count | 449 Count | 62 Count | 2.68 VDC | 0 VDC |
| 1758182424 | 72 Count | 426 Count | 62 Count | 2.7 VDC | 0 VDC |
| 1758181524 | 71 Count | 401 Count | 62 Count | 2.58 VDC | 0 VDC |
| 1758180623 | 70 Count | 375 Count | 62 Count | 2.7 VDC | 0 VDC |
| 1758179722 | 66 Count | 348 Count | 59 Count | 2.84 VDC | 0 VDC |
| 1758178821 | 65 Count | 311 Count | 59 Count | 2.86 VDC | 0 VDC |
| 1758177921 | 35 Count | 242 Count | 30 Count | 2.94 VDC | 0 VDC |
| 1758177020 | 29 Count | 204 Count | 25 Count | 2.85 VDC | 0 VDC |
| 1758176119 | 27 Count | 168 Count | 24 Count | 2.87 VDC | 0 VDC |
| 1758175218 | 25 Count | 133 Count | 24 Count | 2.83 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)