This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764651981 | 81 Count | 229 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764651681 | 80 Count | 227 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764651381 | 79 Count | 222 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764651081 | 78 Count | 221 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764650781 | 77 Count | 218 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764650481 | 76 Count | 215 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764650182 | 75 Count | 212 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764649882 | 74 Count | 211 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764649582 | 73 Count | 206 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764649282 | 72 Count | 205 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764648982 | 71 Count | 203 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764648682 | 70 Count | 199 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764648382 | 69 Count | 197 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764648082 | 68 Count | 195 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764647783 | 67 Count | 190 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764647482 | 66 Count | 190 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764647182 | 65 Count | 187 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764646883 | 64 Count | 183 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764646583 | 63 Count | 179 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764646283 | 62 Count | 179 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764645983 | 61 Count | 174 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764645683 | 60 Count | 173 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764645383 | 59 Count | 171 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764645083 | 58 Count | 167 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1764644783 | 57 Count | 164 Count | 0 Count | 3.81 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)