This is the latest recevied telemetry packets stored in our database for station/object SP2EOE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatura CPU* | Obciazenie CPU* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732465349 | 36.5 Deg.C | 0 % | 0 | 0 | 0 |
| 1732464449 | 36.4 Deg.C | 0 % | 0 | 0 | 0 |
| 1732463549 | 36.6 Deg.C | 0 % | 0 | 0 | 0 |
| 1732462649 | 36.7 Deg.C | 0 % | 0 | 0 | 0 |
| 1732461749 | 36.8 Deg.C | 0 % | 0 | 0 | 0 |
| 1732460849 | 36.8 Deg.C | 0 % | 0 | 0 | 0 |
| 1732459949 | 36.9 Deg.C | 0 % | 0 | 0 | 0 |
| 1732459048 | 37 Deg.C | 0 % | 0 | 0 | 0 |
| 1732458148 | 37 Deg.C | 0 % | 0 | 0 | 0 |
| 1732457248 | 37.1 Deg.C | 0 % | 0 | 0 | 0 |
| 1732456348 | 37.2 Deg.C | 0 % | 0 | 0 | 0 |
| 1732455448 | 37.3 Deg.C | 0 % | 0 | 0 | 0 |
| 1732454548 | 37.4 Deg.C | 0 % | 0 | 0 | 0 |
| 1732453648 | 37.4 Deg.C | 0 % | 0 | 0 | 0 |
| 1732452748 | 37.5 Deg.C | 0 % | 0 | 0 | 0 |
| 1732451848 | 37.5 Deg.C | 0 % | 0 | 0 | 0 |
| 1732450948 | 37.7 Deg.C | 0 % | 0 | 0 | 0 |
| 1732450048 | 37.7 Deg.C | 0 % | 0 | 0 | 0 |
| 1732449148 | 37.8 Deg.C | 0 % | 0 | 0 | 0 |
| 1732448248 | 37.9 Deg.C | 0 % | 0 | 0 | 0 |
| 1732447348 | 38 Deg.C | 0 % | 0 | 0 | 0 |
| 1732446447 | 38 Deg.C | 0 % | 0 | 0 | 0 |
| 1732445547 | 38.1 Deg.C | 0 % | 0 | 0 | 0 |
| 1732444647 | 38.1 Deg.C | 0 % | 0 | 0 | 0 |
| 1732443747 | 38.3 Deg.C | 0 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temperatura CPU: 0, 0.1, 0
Obciazenie CPU: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)