This is the latest recevied telemetry packets stored in our database for station/object SP2WIT-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754118203 | 16 Count | 64 Count | 0 Count | 4.2 VDC | 5.82 VDC |
| 1754116406 | 15 Count | 64 Count | 0 Count | 4.2 VDC | 5.82 VDC |
| 1754114605 | 14 Count | 63 Count | 0 Count | 4.2 VDC | 5.82 VDC |
| 1754112805 | 13 Count | 63 Count | 0 Count | 4.2 VDC | 5.8 VDC |
| 1754111011 | 12 Count | 63 Count | 0 Count | 4.23 VDC | 5.74 VDC |
| 1754109204 | 11 Count | 63 Count | 0 Count | 4.13 VDC | 5.78 VDC |
| 1754107405 | 10 Count | 63 Count | 0 Count | 4.14 VDC | 4.68 VDC |
| 1754105609 | 9 Count | 63 Count | 0 Count | 4.13 VDC | 4.68 VDC |
| 1754103809 | 8 Count | 60 Count | 0 Count | 4.13 VDC | 1.22 VDC |
| 1754102010 | 7 Count | 52 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1754100210 | 6 Count | 43 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1754098412 | 5 Count | 36 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1754096614 | 4 Count | 30 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1754094814 | 3 Count | 24 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1754093015 | 2 Count | 18 Count | 0 Count | 4.14 VDC | 0 VDC |
| 1754091217 | 1 Count | 9 Count | 0 Count | 4.14 VDC | 0 VDC |
| 1754089419 | 0 Count | 5 Count | 0 Count | 4.14 VDC | 0 VDC |
| 1754087624 | 522 Count | 1004 Count | 341 Count | 4.14 VDC | 0 VDC |
| 1754085822 | 521 Count | 995 Count | 341 Count | 4.14 VDC | 0 VDC |
| 1754084023 | 520 Count | 987 Count | 341 Count | 4.14 VDC | 0 VDC |
| 1754082225 | 519 Count | 963 Count | 341 Count | 4.14 VDC | 0 VDC |
| 1754080424 | 518 Count | 951 Count | 341 Count | 4.14 VDC | 0 VDC |
| 1754078626 | 516 Count | 919 Count | 340 Count | 4.14 VDC | 0 VDC |
| 1754076825 | 515 Count | 907 Count | 340 Count | 4.15 VDC | 0 VDC |
| 1754075029 | 514 Count | 895 Count | 340 Count | 4.14 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)