This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1745050283 | 66 Count | 816 Count | 0 Count | 4.06 VDC | 5.52 VDC |
| 1745048484 | 64 Count | 717 Count | 0 Count | 4.06 VDC | 5.52 VDC |
| 1745046684 | 62 Count | 703 Count | 0 Count | 4.08 VDC | 4.4 VDC |
| 1745043087 | 58 Count | 674 Count | 0 Count | 4.06 VDC | 4.42 VDC |
| 1745041288 | 56 Count | 660 Count | 0 Count | 4.06 VDC | 4.42 VDC |
| 1745039488 | 54 Count | 646 Count | 0 Count | 4.06 VDC | 4.42 VDC |
| 1745037689 | 52 Count | 632 Count | 0 Count | 4.06 VDC | 4.42 VDC |
| 1745035891 | 50 Count | 618 Count | 0 Count | 4.06 VDC | 4.44 VDC |
| 1745034092 | 48 Count | 604 Count | 0 Count | 4.06 VDC | 0.18 VDC |
| 1745032293 | 46 Count | 590 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745030494 | 44 Count | 576 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745028694 | 42 Count | 562 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745026896 | 40 Count | 548 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745025096 | 38 Count | 534 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745023300 | 36 Count | 523 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745021498 | 34 Count | 515 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745019699 | 32 Count | 503 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745017900 | 30 Count | 489 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745016101 | 28 Count | 474 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745014302 | 26 Count | 460 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745012504 | 24 Count | 447 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745010703 | 22 Count | 435 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745008904 | 20 Count | 421 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745007106 | 18 Count | 406 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1745005307 | 16 Count | 392 Count | 0 Count | 4.07 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)