This is the latest recevied telemetry packets stored in our database for station/object SA0FRD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755452522 | 23.1 C | 56.95 % | 1019.75 hPa | 0 | 0 |
| 1755452349 | 22.8 C | 55.31 % | 1019.5 hPa | 0 | 0 |
| 1755452179 | 22.3 C | 54.85 % | 1021.25 hPa | 0 | 0 |
| 1755452028 | 21.8 C | 55.47 % | 1022.88 hPa | 0 | 0 |
| 1755451875 | 21.3 C | 56.11 % | 1019.38 hPa | 0 | 0 |
| 1755448387 | 23 C | 56.18 % | 1019.63 hPa | 0 | 0 |
| 1755447701 | 22.2 C | 52.94 % | 1015.25 hPa | 0 | 0 |
| 1755442814 | 24.7 C | 52.8 % | 1020.25 hPa | 0 | 0 |
| 1755441694 | 22.6 C | 54.15 % | 1016.88 hPa | 0 | 0 |
| 1755429100 | 25.4 C | 47.6 % | 1016.88 hPa | 0 | 0 |
| 1755428766 | 25.8 C | 47.79 % | 1018.13 hPa | 0 | 0 |
| 1755411477 | 19.5 C | 56.13 % | 1015.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)