This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1746214036 | 32 Count | 569 Count | 19 Count | 4.41 VDC | 0 VDC |
| 1746212236 | 29 Count | 471 Count | 17 Count | 4.4 VDC | 0 VDC |
| 1746210435 | 21 Count | 330 Count | 10 Count | 4.41 VDC | 0 VDC |
| 1746208634 | 19 Count | 224 Count | 9 Count | 4.4 VDC | 0 VDC |
| 1746183438 | 85 Count | 785 Count | 60 Count | 4.4 VDC | 0 VDC |
| 1746176236 | 67 Count | 716 Count | 46 Count | 4.4 VDC | 0 VDC |
| 1746174435 | 65 Count | 702 Count | 45 Count | 4.4 VDC | 0 VDC |
| 1746172634 | 61 Count | 681 Count | 42 Count | 4.4 VDC | 0 VDC |
| 1746170834 | 58 Count | 662 Count | 40 Count | 4.4 VDC | 0 VDC |
| 1746169033 | 55 Count | 624 Count | 38 Count | 4.4 VDC | 0 VDC |
| 1746165432 | 49 Count | 549 Count | 34 Count | 4.4 VDC | 0 VDC |
| 1746163631 | 41 Count | 502 Count | 27 Count | 4.4 VDC | 0 VDC |
| 1746161837 | 34 Count | 483 Count | 25 Count | 4.4 VDC | 0 VDC |
| 1746160036 | 31 Count | 462 Count | 23 Count | 4.4 VDC | 0 VDC |
| 1746158235 | 28 Count | 443 Count | 21 Count | 4.39 VDC | 0 VDC |
| 1746156435 | 24 Count | 396 Count | 18 Count | 4.39 VDC | 0 VDC |
| 1746154634 | 21 Count | 341 Count | 16 Count | 4.41 VDC | 0 VDC |
| 1746152833 | 18 Count | 285 Count | 14 Count | 4.4 VDC | 0 VDC |
| 1746151033 | 15 Count | 237 Count | 12 Count | 4.39 VDC | 0 VDC |
| 1746149232 | 12 Count | 183 Count | 10 Count | 4.41 VDC | 0 VDC |
| 1746147432 | 8 Count | 121 Count | 7 Count | 4.41 VDC | 0 VDC |
| 1746145631 | 4 Count | 58 Count | 4 Count | 4.4 VDC | 0 VDC |
| 1746143830 | 207 Count | 1017 Count | 134 Count | 4.39 VDC | 0 VDC |
| 1746142030 | 202 Count | 967 Count | 130 Count | 4.38 VDC | 0 VDC |
| 1746140236 | 194 Count | 904 Count | 127 Count | 4.39 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)