This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1749015830 | 17 Count | 188 Count | 0 Count | 4.16 VDC | 4.32 VDC |
| 1749014031 | 16 Count | 181 Count | 0 Count | 4.16 VDC | 4.32 VDC |
| 1749012232 | 15 Count | 173 Count | 0 Count | 4.16 VDC | 4.32 VDC |
| 1749010432 | 14 Count | 158 Count | 0 Count | 4.16 VDC | 4.32 VDC |
| 1749008634 | 13 Count | 151 Count | 0 Count | 4.16 VDC | 1.7 VDC |
| 1749006834 | 12 Count | 146 Count | 0 Count | 4.16 VDC | 0.78 VDC |
| 1749005036 | 11 Count | 140 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1749003237 | 10 Count | 132 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1749001438 | 9 Count | 123 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748999640 | 8 Count | 110 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748997840 | 7 Count | 100 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748996042 | 6 Count | 93 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748994243 | 5 Count | 83 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748992444 | 4 Count | 70 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748990644 | 3 Count | 55 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748988845 | 2 Count | 43 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748987046 | 1 Count | 24 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748985246 | 0 Count | 12 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748983446 | 90 Count | 1016 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748979848 | 88 Count | 987 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1748974447 | 85 Count | 956 Count | 0 Count | 4.16 VDC | 0.26 VDC |
| 1748972648 | 83 Count | 940 Count | 0 Count | 4.16 VDC | 2 VDC |
| 1748970849 | 82 Count | 928 Count | 0 Count | 4.16 VDC | 1.2 VDC |
| 1748969049 | 81 Count | 903 Count | 0 Count | 4.16 VDC | 1.5 VDC |
| 1748967249 | 80 Count | 891 Count | 0 Count | 4.16 VDC | 2.7 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)