This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764462815 | 8 Count | 54 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764461015 | 6 Count | 38 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764459216 | 4 Count | 27 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764457417 | 2 Count | 16 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764455615 | 0 Count | 5 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764453805 | 181 Count | 999 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764452007 | 179 Count | 988 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764450206 | 177 Count | 977 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764448407 | 175 Count | 966 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764446607 | 173 Count | 949 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764444809 | 171 Count | 938 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764443008 | 169 Count | 927 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764441209 | 167 Count | 916 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764439409 | 165 Count | 900 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764437611 | 163 Count | 890 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764435810 | 161 Count | 878 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764434010 | 159 Count | 867 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764432201 | 152 Count | 857 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1764430400 | 150 Count | 846 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1764428602 | 148 Count | 835 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1764426802 | 146 Count | 823 Count | 0 Count | 4.08 VDC | 1.92 VDC |
| 1764425001 | 144 Count | 806 Count | 0 Count | 4.08 VDC | 2.6 VDC |
| 1764423202 | 142 Count | 789 Count | 0 Count | 4.08 VDC | 4.36 VDC |
| 1764421403 | 140 Count | 779 Count | 0 Count | 4.08 VDC | 4.36 VDC |
| 1764419602 | 138 Count | 769 Count | 0 Count | 4.08 VDC | 4.36 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)