This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1744943662 | 34 Count | 145 Count | 19 Count | 4.01 VDC | 0 VDC |
| 1744942763 | 31 Count | 133 Count | 17 Count | 4.01 VDC | 0 VDC |
| 1744941863 | 30 Count | 128 Count | 17 Count | 4.01 VDC | 0 VDC |
| 1744940964 | 27 Count | 116 Count | 15 Count | 4.01 VDC | 0 VDC |
| 1744940063 | 25 Count | 100 Count | 14 Count | 4.01 VDC | 0 VDC |
| 1744939164 | 22 Count | 89 Count | 12 Count | 4.01 VDC | 0 VDC |
| 1744938264 | 21 Count | 83 Count | 12 Count | 4.01 VDC | 0 VDC |
| 1744937365 | 18 Count | 72 Count | 10 Count | 4.01 VDC | 0 VDC |
| 1744936465 | 17 Count | 66 Count | 10 Count | 4.01 VDC | 0 VDC |
| 1744935565 | 14 Count | 55 Count | 8 Count | 3.98 VDC | 0 VDC |
| 1744934672 | 12 Count | 47 Count | 7 Count | 4 VDC | 0 VDC |
| 1744933765 | 10 Count | 40 Count | 6 Count | 4 VDC | 0 VDC |
| 1744932866 | 8 Count | 32 Count | 5 Count | 4 VDC | 0 VDC |
| 1744931966 | 6 Count | 26 Count | 4 Count | 4 VDC | 0 VDC |
| 1744931066 | 4 Count | 17 Count | 3 Count | 4.01 VDC | 0 VDC |
| 1744930167 | 1 Count | 10 Count | 1 Count | 4 VDC | 0 VDC |
| 1744929267 | 239 Count | 1004 Count | 148 Count | 4.01 VDC | 0 VDC |
| 1744928372 | 236 Count | 994 Count | 146 Count | 4 VDC | 0 VDC |
| 1744927467 | 235 Count | 981 Count | 146 Count | 4.01 VDC | 0 VDC |
| 1744926568 | 231 Count | 970 Count | 143 Count | 4.01 VDC | 0 VDC |
| 1744925675 | 229 Count | 956 Count | 142 Count | 4.01 VDC | 0 VDC |
| 1744924769 | 227 Count | 951 Count | 141 Count | 4.01 VDC | 0 VDC |
| 1744923868 | 225 Count | 944 Count | 140 Count | 4.01 VDC | 0 VDC |
| 1744922969 | 223 Count | 934 Count | 139 Count | 4.01 VDC | 0 VDC |
| 1744922071 | 221 Count | 927 Count | 138 Count | 4.01 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)