This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757026600 | 180 Count | 346 Count | 177 Count | 4.41 VDC | 0 VDC |
| 1757024800 | 135 Count | 266 Count | 133 Count | 4.42 VDC | 0 VDC |
| 1757022999 | 97 Count | 186 Count | 96 Count | 4.39 VDC | 0 VDC |
| 1757021198 | 55 Count | 99 Count | 55 Count | 4.39 VDC | 0 VDC |
| 1757019398 | 553 Count | 1065 Count | 539 Count | 4.39 VDC | 0 VDC |
| 1757017597 | 492 Count | 965 Count | 479 Count | 4.39 VDC | 0 VDC |
| 1757015796 | 456 Count | 880 Count | 444 Count | 4.39 VDC | 0 VDC |
| 1757014004 | 408 Count | 781 Count | 401 Count | 4.38 VDC | 0 VDC |
| 1757012203 | 365 Count | 682 Count | 359 Count | 4.41 VDC | 0 VDC |
| 1757010403 | 300 Count | 560 Count | 295 Count | 4.4 VDC | 0 VDC |
| 1757008601 | 228 Count | 439 Count | 224 Count | 4.38 VDC | 0 VDC |
| 1757006800 | 176 Count | 346 Count | 173 Count | 4.41 VDC | 0 VDC |
| 1757004999 | 129 Count | 255 Count | 127 Count | 4.4 VDC | 0 VDC |
| 1757003199 | 85 Count | 170 Count | 84 Count | 4.41 VDC | 0 VDC |
| 1757001398 | 39 Count | 81 Count | 39 Count | 4.42 VDC | 0 VDC |
| 1756999597 | 500 Count | 1019 Count | 486 Count | 4.4 VDC | 0 VDC |
| 1756997797 | 455 Count | 929 Count | 442 Count | 4.39 VDC | 0 VDC |
| 1756995996 | 407 Count | 838 Count | 395 Count | 4.39 VDC | 0 VDC |
| 1756994195 | 360 Count | 736 Count | 349 Count | 4.43 VDC | 0 VDC |
| 1756992404 | 284 Count | 606 Count | 278 Count | 4.4 VDC | 0 VDC |
| 1756990603 | 243 Count | 511 Count | 238 Count | 4.39 VDC | 0 VDC |
| 1756988802 | 214 Count | 440 Count | 210 Count | 4.4 VDC | 0 VDC |
| 1756987002 | 182 Count | 365 Count | 179 Count | 4.41 VDC | 0 VDC |
| 1756985201 | 132 Count | 276 Count | 130 Count | 4.39 VDC | 0 VDC |
| 1756983400 | 99 Count | 200 Count | 98 Count | 4.39 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)