This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761717121 | 61 Count | 962 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761715321 | 54 Count | 896 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761713520 | 50 Count | 853 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761711719 | 46 Count | 809 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761709919 | 42 Count | 732 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761708118 | 38 Count | 670 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761706318 | 34 Count | 626 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761704517 | 30 Count | 577 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1761702716 | 27 Count | 532 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761700915 | 25 Count | 469 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761699114 | 23 Count | 422 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761697313 | 20 Count | 365 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761695513 | 16 Count | 310 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761693712 | 14 Count | 262 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761691911 | 11 Count | 212 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761690111 | 7 Count | 165 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761688310 | 4 Count | 111 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761686509 | 2 Count | 69 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761684709 | 63 Count | 1010 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1761682908 | 60 Count | 937 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761679376 | 46 Count | 773 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761677576 | 40 Count | 688 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1761675775 | 36 Count | 617 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1761673974 | 34 Count | 548 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1761672167 | 29 Count | 475 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)