This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765110079 | 53 Count | 756 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1765108278 | 48 Count | 723 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765104692 | 38 Count | 521 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765102892 | 33 Count | 463 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765101091 | 30 Count | 363 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765099290 | 25 Count | 217 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765097490 | 21 Count | 179 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765095689 | 16 Count | 140 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765093888 | 12 Count | 110 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765092087 | 8 Count | 80 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765090287 | 3 Count | 48 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765088486 | 118 Count | 1021 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765086685 | 115 Count | 990 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765084885 | 111 Count | 958 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765083084 | 107 Count | 928 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765081283 | 105 Count | 899 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765079483 | 103 Count | 865 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765077682 | 100 Count | 830 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765075881 | 96 Count | 800 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765074080 | 92 Count | 767 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765072280 | 88 Count | 735 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765070479 | 84 Count | 701 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765068678 | 80 Count | 667 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765066878 | 76 Count | 627 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765065077 | 72 Count | 592 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)