This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1746138985 | 17 Count | 297 Count | 0 Count | 3.1 VDC | 0 VDC |
| 1746135384 | 17 Count | 283 Count | 0 Count | 3.13 VDC | 0 VDC |
| 1746131784 | 17 Count | 246 Count | 0 Count | 3.2 VDC | 0 VDC |
| 1746128184 | 17 Count | 240 Count | 0 Count | 3.24 VDC | 0 VDC |
| 1746124584 | 17 Count | 230 Count | 0 Count | 3.23 VDC | 0 VDC |
| 1746120984 | 17 Count | 185 Count | 0 Count | 3.32 VDC | 0 VDC |
| 1746117384 | 17 Count | 165 Count | 0 Count | 3.31 VDC | 0 VDC |
| 1746113784 | 17 Count | 155 Count | 0 Count | 3.33 VDC | 0 VDC |
| 1746110184 | 17 Count | 145 Count | 0 Count | 3.23 VDC | 0 VDC |
| 1746106584 | 17 Count | 139 Count | 0 Count | 3.28 VDC | 0 VDC |
| 1746102983 | 17 Count | 133 Count | 0 Count | 3.13 VDC | 0 VDC |
| 1746099383 | 17 Count | 109 Count | 0 Count | 2.99 VDC | 0 VDC |
| 1746096215 | 0 Count | 64 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1746096140 | 0 Count | 64 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1746095783 | 16 Count | 93 Count | 0 Count | 3.15 VDC | 0 VDC |
| 1746095625 | 16 Count | 93 Count | 0 Count | 3.09 VDC | 0 VDC |
| 1746092025 | 9 Count | 58 Count | 0 Count | 3.12 VDC | 0 VDC |
| 1746088425 | 0 Count | 0 Count | 0 Count | 2.99 VDC | 0 VDC |
| 1746087884 | 0 Count | 64 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1746084283 | 1 Count | 1014 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1746080683 | 1 Count | 973 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1746077083 | 1 Count | 963 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1746073483 | 1 Count | 957 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1746069883 | 1 Count | 951 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1746066283 | 1 Count | 945 Count | 0 Count | 4.21 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)