This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1741908891 | 7 Count | 805 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1741907092 | 6 Count | 705 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1741905292 | 5 Count | 600 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1741903493 | 4 Count | 495 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1741901692 | 3 Count | 379 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1741898094 | 1 Count | 165 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1741896294 | 0 Count | 79 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1741894495 | 8 Count | 1096 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1741892695 | 7 Count | 919 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1741890896 | 6 Count | 815 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1741889097 | 5 Count | 679 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1741887297 | 4 Count | 565 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1741885498 | 3 Count | 441 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1741883698 | 2 Count | 357 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1741881898 | 1 Count | 258 Count | 0 Count | 4.19 VDC | 1 VDC |
| 1741880099 | 0 Count | 104 Count | 0 Count | 4.19 VDC | 2.74 VDC |
| 1741876501 | 21 Count | 968 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1741874701 | 20 Count | 958 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1741872902 | 19 Count | 949 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1741871103 | 18 Count | 922 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1741869305 | 17 Count | 914 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1741867506 | 16 Count | 905 Count | 0 Count | 4.2 VDC | 4.3 VDC |
| 1741865707 | 15 Count | 897 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1741863907 | 14 Count | 889 Count | 0 Count | 4.2 VDC | 4.3 VDC |
| 1741862109 | 13 Count | 881 Count | 0 Count | 4.2 VDC | 4.32 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)