This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1744950172 | 168 Count | 1011 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744948371 | 164 Count | 990 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744946570 | 160 Count | 966 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744944770 | 156 Count | 919 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744942969 | 152 Count | 897 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744941169 | 148 Count | 874 Count | 0 Count | 4 VDC | 0 VDC |
| 1744939368 | 144 Count | 847 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744937567 | 140 Count | 827 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744935766 | 136 Count | 808 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744933965 | 132 Count | 791 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744932164 | 128 Count | 775 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744930364 | 124 Count | 759 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744928563 | 120 Count | 737 Count | 0 Count | 4 VDC | 0 VDC |
| 1744926763 | 116 Count | 717 Count | 0 Count | 4 VDC | 0 VDC |
| 1744924962 | 112 Count | 695 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744923161 | 108 Count | 679 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744921361 | 104 Count | 663 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744919560 | 100 Count | 642 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744917759 | 96 Count | 613 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1744915959 | 92 Count | 596 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1744914158 | 88 Count | 579 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1744912358 | 83 Count | 563 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1744910557 | 79 Count | 543 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1744908756 | 75 Count | 525 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1744906956 | 70 Count | 463 Count | 0 Count | 4.02 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)