This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761057011 | 77 Count | 1040 Count | 38 Count | 4.11 VDC | 5.38 VDC |
| 1761056111 | 74 Count | 996 Count | 36 Count | 4.11 VDC | 5.38 VDC |
| 1761055211 | 73 Count | 959 Count | 36 Count | 4.11 VDC | 5.38 VDC |
| 1761054312 | 70 Count | 926 Count | 34 Count | 4.11 VDC | 5.38 VDC |
| 1761053411 | 69 Count | 867 Count | 34 Count | 4.11 VDC | 5.38 VDC |
| 1761052512 | 66 Count | 818 Count | 32 Count | 4.11 VDC | 5.38 VDC |
| 1761051611 | 64 Count | 788 Count | 31 Count | 4.11 VDC | 5.38 VDC |
| 1761049812 | 60 Count | 732 Count | 29 Count | 4.11 VDC | 5.38 VDC |
| 1761048913 | 58 Count | 706 Count | 28 Count | 4.11 VDC | 5.38 VDC |
| 1761048013 | 56 Count | 685 Count | 27 Count | 4.11 VDC | 5.38 VDC |
| 1761047103 | 48 Count | 665 Count | 25 Count | 4.11 VDC | 5.38 VDC |
| 1761046204 | 47 Count | 632 Count | 25 Count | 4.11 VDC | 5.38 VDC |
| 1761045303 | 44 Count | 592 Count | 23 Count | 4.11 VDC | 5.38 VDC |
| 1761044404 | 43 Count | 578 Count | 23 Count | 4.11 VDC | 5.38 VDC |
| 1761043504 | 40 Count | 546 Count | 21 Count | 4.11 VDC | 5.38 VDC |
| 1761042604 | 38 Count | 525 Count | 20 Count | 4.11 VDC | 5.38 VDC |
| 1761041704 | 36 Count | 493 Count | 19 Count | 4.11 VDC | 5.38 VDC |
| 1761040804 | 34 Count | 471 Count | 18 Count | 4.11 VDC | 5.38 VDC |
| 1761039904 | 32 Count | 437 Count | 17 Count | 4.11 VDC | 5.38 VDC |
| 1761039004 | 30 Count | 410 Count | 16 Count | 4.11 VDC | 5.38 VDC |
| 1761038105 | 27 Count | 375 Count | 14 Count | 4.11 VDC | 5.38 VDC |
| 1761037205 | 26 Count | 351 Count | 14 Count | 4.11 VDC | 5.38 VDC |
| 1761036305 | 23 Count | 317 Count | 12 Count | 4.11 VDC | 5.38 VDC |
| 1761035405 | 22 Count | 285 Count | 12 Count | 4.15 VDC | 5.24 VDC |
| 1761034506 | 20 Count | 241 Count | 11 Count | 4.11 VDC | 5.38 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)