This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761733941 | 0 Count | 50 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761730341 | 0 Count | 41 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761726741 | 0 Count | 33 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761723141 | 0 Count | 25 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1761719542 | 0 Count | 16 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761715941 | 0 Count | 8 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761712341 | 59 Count | 1005 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761708741 | 59 Count | 997 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761705141 | 59 Count | 989 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761701541 | 59 Count | 980 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761697941 | 59 Count | 972 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761694341 | 59 Count | 957 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761690740 | 59 Count | 948 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761687140 | 59 Count | 940 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761683540 | 59 Count | 931 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761679940 | 59 Count | 923 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761676340 | 59 Count | 914 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761672740 | 59 Count | 906 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761669140 | 59 Count | 898 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761665539 | 59 Count | 889 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761661939 | 59 Count | 881 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761658339 | 59 Count | 859 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761654739 | 59 Count | 851 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1761651139 | 59 Count | 837 Count | 0 Count | 3.91 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)